Knitting mittens scheme and description of knitting for beginners

With the onset of cold weather, mittens are an indispensable thing in everyone’s wardrobe. It is very important to protect your hands from the cold, otherwise you can dry your skin which will lead to cracks and wounds.

How to knit mittens for beginners step by step

For knitting we need: wool - 100 g. x 4. We begin to knit with a cuff (the initial part of the product). We measure the circumference of the cuff according to the circumference of the brush.

We knit with an elastic band 2 x 2, so that the number of typed loops would be a multiple of four. We collect loops for 2 sp., Then distribute them in an equal amount to the rest. Knitting takes place in a circle. Pay attention to the fact that front loops (l.p.) are made for the front walls, wrong seams (ip) - for the rear.

We make a cuff 5 - 6 cm high, then go to the main pattern. We knit the main pattern also 5 - 6 cm high and create a hole for the thumb.
Suppose we have 12 loops on each spoke (sp.).

We make a hole for the thumb on the third joint venture. according to the scheme:
1. We knit the first item, remove the next item with a pin or marker;
2. To another sp. we put in air loops as much as we removed on a pin;

We knit further in a circle. We knit the product to the end of the pattern. After we have tied the main part of the mittens, we begin to knit a thumb.

We drag the loops removed on a pin to the joint venture. The number of loops for the thumb should be a multiple of 3. We knit the loops in a circle, starting to decrease the loops from the thumbnail. When we have 6 loops left, we stretch the woolen thread through the loops and tighten.

Men's mittens with an ornament

In order to connect the winter men's mittens with the “Deer” ornament for beginners, we need: yarn - 150 g, knitting needles.

The main patterns:

- gum 1 x 1 = 1 l.p. x 1 I.p.
- front surface: l.p.

Knitting density: 16 p. X 18 p. = 10 x 10 cm.

Working process:

Left mitt with ornament for beginner needlewomen:
We recruit 36 ​​p.p. and distribute to 4 sp. We knit a rubber band 1 x 1 in a circle about 10 cm. We change the row between the first and fourth sp. Next, we make faces. smooth surface - 2 p.

We knit a pattern with an ornament according to the scheme:

1. on the 1st and 2nd sp. do 2 p. rapport A x 9 p.;

2. on the 3rd and 4th sp. we knit 18 p. of rapport C;

3. We repeat in rapport 1 the first and second p., In rapports B and C we do from 1 to the 24th p.;

4. Starting from the 2nd row of persons. Glad we carry out additions for a wedge of a thumb:
but. on the 2nd joint venture we knit loops according to the picture. When until the end of the row 4 points remain, then we add 1 point;

b. We knit 2 p. According to the drawing, then again add 1 p. And so on according to the drawing. We include all added loops in our general drawing;

Repetitions are done in every 2 r. x 5 times. After we have completed all the additions, we do 1 row. In the next p. over the loops we pick up a new 2 p., and continue to knit in a circle up to 16 cm.

For the formation of the top, at the beginning of the 1st and 3-1 knitting needles we knit 1 st., According to the scheme + 2 hp together. At the end of the 2nd and 4th knitting needles we knit 2 hp. together with a broach (remove 1 p. as a lp, then knit 1 lp and pull it through the shot), 1 lp We repeat these reductions in each row until we have 9 p.

We take scissors and cut the thread. Pull the thread through the loop and tighten.

Next, we knit a thumb. The left loops are pulled to cn. and knit in a circle according to the picture. 6 cm we knit persons. smooth surface, knitting rapport A.

When we get to the fingernail, we begin to reduce the loop. For this we knit 2 hp together until 4 p. left. Take the scissors and cut the thread. Pull the thread through the loop and tighten.

Right mitten: Knits similarly to the left, according to symmetry.

How to knit mittens with knitting needles for beginners

Mittens Mittens - a fashionable winter accessory to the winter image of a young needlewoman. After reading the article, you can independently knit the mittens for beginners.

For knitting mitts we need: threads - 100 g, knitting needles x 5.

In order for the mitts to fit well on the hand, we will slightly reduce the number of loops. So, we knit 44 p., Then after 5 cm we reduce their number to 40.

We collect loops, and start knitting with 1 x 1 gum about 5 cm (1 bp x 1 ip) Evenly distribute the stitches for 4 sts., So 11 stitches each.

After we have finished knitting an elastic band, we reduce the number of items by knitting 2 lp together and go to the main drawing.

The first 2 knitting needles are the front part of the mitts, the rest are the lower ones. We knit the lower part only with lp, and we make the front part according to the “double rice” pattern.

We do 1 sp., We knit 2 hp together for a "wedge". The basic pattern is very similar to a 1 x 1 gum, but with an offset in rows. We knit 2 p. according to the figure, the following change direction - over lp we knit ip and vice versa. Thus, we alternate rows, changing direction. After 4 rows we knit a “wedge”, starting from 2 p. Of the first joint venture. We make increases, we knit 1 p., We crochet (n.), Then 2 p. + N.

We work according to the picture. In the next p. knitwear We reach the base of the thumb. We knit 1 st. Of the first knitting needle, then remove 9 st. On a pin, and make 4 air loops. Next, we knit In the next row, we knit these loops 2 together.

Toward the end, we again turn to knitting gum, then close the loops.

We turn to knitting the thumb. We add 7 more to 9 p. (= 16 p.). Distribute 4 p. For each joint venture. and knit hp - 6 p., Then gum.

We knit several rows of elastic and close the loops.

Left mitten mitt is ready!

We knit the right mitten symmetrically according to a similar pattern.

How to knit mittens with knitting needles for beginners on 4 knitting needles

Knitting warm mittens is a hot topic in the cold season. In order to tie their novice needlewomen we need: wool - 160 gr., 4 knitting needles.

Knitting density: 1.7 p. X 1 cm

Before you start knitting simple mittens, measure the girth of the brush. We got 20 cm. Mittens are knitted for 4 sp. roundabout.

We calculate the number of loops: 20 cm x 1.7 = 34 p. Next, divide them into 4 sp .: 34: 4 = 8.5 Round to 9 p., So we get 36 p. For each sp. 9 p.

Working process:

We knit the first mittens. Mentally divide 4 sp. in 2 parts - lower and upper. Thus, the first 2 sp. - the lower part, the rest - the upper.

We begin to knit the cuff with an elastic band 1 x 1. We alternate the colors of our mittens every 3 rows, so we knit up to 5 - 7 cm.

Next, we make the main part of the mittens in a circle, to the base of the thumb (approximately 5 cm).

We will make a finger hole in the 1st joint venture. for the right mittens, and on the 2nd for the left. We knit 1 st. For 1 st., Knit the rest with facial, and return to the 1st st. So we should get a hole. Next, we knit in a circle to the end of knitting (8 cm).

We make a toe. To do this, we reduce the item in the ranks. On the 1st and 3rd sp. at the beginning we make 2 hp together, and on the 2nd and 4th we knit 2 hp in the end. We knit until 2 p. Remain, close them.

We return to knitting a thumb. We should get 7 loops on one joint., 6 - on the other. Next, we work according to the scheme, at the end reducing loops. The remaining 1 loop is closed.

We make the left mitten symmetrically to the right.

Warm mittens are ready!

Knitting openwork mittens on two knitting needles

For knitting openwork mittens on 2 knitting needles for beginners we need: wool - 120 gr., Joint venture.

Do the back:

1. We pick up on the knitting needles the number of loops (depending on size);
2. We work with an elastic band 1 x 1 or 3 x 3, as you like. About 8 cm;
3. We knit the main pattern to the little finger;
4. Reduce the loop and close the knitting;

We make the front part:

1. We pick up on the knitting needles the number of loops (depending on size);
2. We knit with an elastic band 1 x 1 or 3 x 3, as you like. About 8 cm. Make a hole for the thumb;
3. Divide all the loops into 4 parts. 3 parts removed on a pin;
4. The rest are recruited to sp. and we get as many loops as we have on the joint venture. We knit a thumb, close the loops;
5. We work the main part of the main part;
6. Reduce the loop and close the knitting;
7. Connect 2 parts;

Children's mittens knitting scheme and description

After reading the article, you will learn how to knit children's mittens for beginners on their own. In order to tie them you will need: threads and sp ..

Based on our description and diagrams, you can easily cope with this task, even if you are a beginner needlewoman.

For knitting mittens with an ornament we need: 25 gr. thread of different colors, knitting needles, large needle.

We collect 32 p., Wash in a circle. We knit in a circle 17 p. 1 x 1 rubber band.

After the elastic, we add 5 p. To the row, alternately changing the colors of the yarn. After 14 p. from the gum we make a hole for the finger. From the back we knit 22 hp We knit 7 hp, and throw them back. Next, we do the main part to the end. At the end, we reduce the loops and close the knit.

We knit a thumb on a mitt. Take the loops, and knit to 16 p.

We knit 14 p. in height and turn down the item. At the end, close the finger.

The second mittens are made similar to the description.

Knitted mittens with ornament for children

In order to connect children's mittens with an ornament, we need: yarn - 200 gr., Knitting needles x 5.

We collect the required number of loops, make 5 cm with an elastic band 1 x 1. We look according to the description of the scheme.

We make the main part of the product (5cm), add 2 p. In a row.

Make a hole for the finger. For the right hand, we make a hole on the 3rd spoke, for the left - the 4th.

At each spa. 12 p. We make the hole on the 3rd. Knit the first loop, remove the remaining 10 with a pin. On the right knitting needle we collect 10 loops and then we make the main part according to the description.

After the end of the main part, we return to the thumb. We transfer the loops from the pins to the knitting needle, adding the loops so that the total number is a multiple of 3.

We distribute the loops on 3 knitting needles, knit in a circle. At the end of knitting, reduce the loops and close the knit.

The second is done symmetrically to the description of our circuit.

For girls mittens with braids knitting patterns and description

We collect 52 p. And knit in a circle 40 p. rubber band 2 x 2. Next, add 2 more points and work according to the scheme:

1. The finger will begin after 10 p. the main pattern.

2. On the sides we add p. 3 times, thus in sp. 20 p.

3. Set aside the item on the pin. We collect the missing loops, knit according to the scheme.

4. We make the main part according to the scheme. At the end, close the loop.

Children's mittens knitting scheme and description for 3 years to a boy

In order to knit children's mittens for the 3rd boy, we need: yarn - 200 gr., Knitting needles x 5.

We collect the desired number of loops, distribute to each joint. We make a cuff with an elastic band 1 x 1, about 5 cm (the number of loops is briefly 4). The first and second sp. - the upper part of the product, the rest - the bottom.

We make the main part of the product (5cm), add 2 p. In a row.

Make a hole for the finger. For the right hand, we make a hole on the 3rd spoke, for the left - the 4th.

At each spa. 12 p. We make the hole on the 3rd. Knit the first loop, remove the remaining 10 with a pin. On the right knitting needle we collect 10 loops and then we make the main part according to the scheme.

After the end of the main part, we return to the thumb. We transfer the loops from the pins to the knitting needle, adding the loops so that the total number is a multiple of 3.

We distribute the loops on 3 knitting needles, knit in a circle. At the end of knitting, reduce the loops and close the knit.

The second is done symmetrically to the description of the first.

Details of the birds we crochet art. b.n. Sew in place of the eye beads.

How to knit mittens with knitting needles

For knitting mittens with a pattern we need: wool - 120 gr., Knitting needles.

We work according to the description:

1. We dial on sp. the required number of loops (40 p.);

2. We knit with an elastic band 1 x 1 or 3 x 3, as you like. About 8 cm. Make a hole for the thumb. Remove the loop on the pin;

3. We make the main part the main part;

4. Reduce the loop and close the knitting;

5. Go back to the thumb and knit according to the pattern;

6. Connect 2 parts;

Knitted mittens for children video

On the Internet there are many free video tutorials on how to knit children's mittens step by step. For this we need: threads - 150 gr., Knitting needles.

Watch the detailed master class in the next video

Beautiful patterns for mittens knitting scheme

We present a description of several beautiful patterns for knitting:

1. Openwork braids. The pattern report in the diagram is indicated by a red rectangle. The number of rows in the rapport is 10, the loops are 18. Empty cells are facial. In the wrong river. make the front loops wrong.

2. Openwork leaves. Rapport of a pattern of 16 p. (Blue color). In empty cells - l.

3. Openwork chess. Rapport of the pattern 13 p. In height, repeat the pattern from 1 to 24th p. We knit nakida ip, wrong p. according to the scheme.